Answer
May 01, 2023 - 08:08 AM
If the Motor is running and you have your supply on, that means you have a leak.
The motor is equipped with at total stop system and turns off and on as pressure is released.
If it will not "prime" the motor keeps running.
Check list:
1.Check to see if you have any leaks. If their are leaks, tighten connections.
2.Make sure your supply is on. Test this but turning your unit off, then holding down on the trigger until water is steadily going though. If it is not you have a leak or clog.
3. Contact us at arblueclean.com and chat with us in real time so we can help you isolate any issues.
The motor is equipped with at total stop system and turns off and on as pressure is released.
If it will not "prime" the motor keeps running.
Check list:
1.Check to see if you have any leaks. If their are leaks, tighten connections.
2.Make sure your supply is on. Test this but turning your unit off, then holding down on the trigger until water is steadily going though. If it is not you have a leak or clog.
3. Contact us at arblueclean.com and chat with us in real time so we can help you isolate any issues.
