Answer
Sep 13, 2023 - 01:04 PM
Hello,
If you are using the original components and its not going in its likely because you have some mineral deposit happening or you have an obstruction like a rock. Consider spraying a lubricant onto the spring. then,( assuming your o-rings are in good shape / not cracked or missing) with some petroleum Jelly, saturate your O-ring.
Let the lubricant work a bit, then with a small Phillips make sure the spring is functioning as normal. by depressing it a bit.
Then test again.
If you have more questions you can chat with us in real time on our site at www.arblueclean.com
If you are using the original components and its not going in its likely because you have some mineral deposit happening or you have an obstruction like a rock. Consider spraying a lubricant onto the spring. then,( assuming your o-rings are in good shape / not cracked or missing) with some petroleum Jelly, saturate your O-ring.
Let the lubricant work a bit, then with a small Phillips make sure the spring is functioning as normal. by depressing it a bit.
Then test again.
If you have more questions you can chat with us in real time on our site at www.arblueclean.com
